Features haircut box

Send

Haircut box is considered one of the classic options. This hairstyle is suitable for almost all men. It does not require any fundamental changes in the image, emphasizes confidence and courage. In addition, it remains stylish for a long time.

Nobody knows where this hairstyle comes from. There is a version that she was very popular among athletes. According to another version, American soldiers once wore such a haircut. The peak of its popularity came in the 90s.

However, at present, male hair cut half-boxes remains the most popular among men of various professions. She will look great with sportswear, and with a uniform, and with a classic suit.

In addition, its indisputable advantage is that it does not require any heavy styling. You do not need styling tools, and sometimes you can make a great hairstyle only with the help of your hands, slightly straightening your hair.

This haircut has also the age of versatility. It will suit both young guys and adult respectable men. And the latter will not look ridiculous at all.

It is worth saying that, despite the fact that the haircut halfbox refers to the classic hairstyles, there are some of its options. For example:

She can be with bangs and without her. Moreover, its length can also be varied. This hairstyle is considered a club option.
The line on which short hairs make the transition to longer ones can also change. A haircut is considered a classic, in which the hair on the bottom of the head is from a few mm to 5 cm long.

But the hair on the top can reach 8 cm, depending on the wishes of the man.
Very often, young guys ask to cut out some drawings on the bottom of their heads in order to look more stylish and individual.

The technology on which this hairstyle is done is not complicated. This requires a hair clipper and scissors. The process does not take much time and includes the following points:

Head wash and comb hair in the direction of their growth.
The barber initially does the edging.
Then the hair is cut from the back of the head. Gradually, the master goes down, reducing their length. This uses the tool that is most convenient in this case. Someone makes it a machine, and someone is more convenient to use scissors.

The hair on the parietal part of the head is treated with thinning scissors. First, cut the tips, and then in the depths of the head of hair.
In order to trim the edging or correct any flaws in the neck, the master uses a typewriter.
The area of the temples is usually trimmed at an angle of 45 degrees.
If the hairstyle is with a bang, then it is formed last. In the classic version, the length of the bangs is equal to the length of the remaining hair in the upper part of the head. However, young guys often make bangs longer.

As you can see, the technology is quite simple haircut. You can do it yourself at home. However, if you want a really neat and good result, it is better to contact the experts.

Haircut box refers to the type of hairstyles that do not require any lengthy and difficult styling. Hair should be washed and dried in the direction in which they grow. Young people often use styling products to put hair on top of their head. These can be mousses, foams, gels. With their help, the hair rises up and is fixed in this position.

Despite the fact that this hairstyle refers to short haircuts, the man does not look bald. The fact is that strands with different lengths create the impression of a large amount of hair on the head. Therefore, people of good age, it is also ideal. A man with such a hairstyle will feel confident at official events and on vacation with friends and acquaintances.

The undoubted advantage is, of course, that it does not require special styling to look stylish and neat. In addition, when hair regrowth, this hairstyle does not lose its shape. And the procedure itself takes a little time. And the price of it is quite acceptable.

There is only one negative side - there are men whom it does not suit at all. For example, if a person has a thin, long face, then you should refuse such a hairstyle. Otherwise, the face will look even longer. In addition, this haircut is still short, so all the flaws of the head, such as moles, scars, etc., will be visible. It is also worth paying attention to the shape of the ears.

It is best to do this hairstyle from a professional master who will help you choose the right shape and the required length.

Cutting a half-box will always remain fashionable, because it is a classic. A classic is eternal.

Who is the halfbox?

Male hair box created for chubby men. Due to its layered structure, it lengthens the shape of the face. Also suitable for owners of square and oval shapes. But if you have a long face, you should consult with a hairdresser before the final decision. He can advise on how best to hide the lengthening and emphasize the special charm of the chosen hairstyle for your face. The exception will be men uneasy with an elongated, but also with thin faces.

Children's haircuts boys varied. But half-box is especially popular. This is due to the fact that the hairstyle does not need to be styled.

Features

Halfbox - universal hairstyle. This man's hairstyle is suitable for teenagers and for adult men. It fits any style of clothing. Both under a classical suit, and jeans with a bright t-shirt. Such a haircut is appropriate for spending time in various places. Surprisingly, the type of hair does not affect its attractive appearance. It is a more extended version of men's haircuts boxing.

Halfboxing is a youth hairstyle, but it is equally suitable for both teenagers and respectable men.

Hairstyle does not require special care, and therefore enjoys such popularity. In order to preserve its attractive appearance for a longer time, it is necessary to wash hair and go for a trimming (preferably once every three weeks). In between the correction, the haircut will keep its shape. For a change it is laid in different ways. With the help of a gel or a special foam, you can ruffle your hair, or divide it into individual strands, as well as beat a bang (by lifting it or making a male haircut with a part on its side).

If you want to know what remedies are available for hair loss in men, we recommend reading our article.

There are several types of semi-box:

option when its lower part is made in the classical style. Performed haircut under the nozzle of a small length. The transition line begins at the temple, then goes to the back of the head. The transition width is 1.5 cm,
variation with bangs or without
in the modern performance on the side parts often cut out the outline of the figure.

In the main zone of this hairstyle, the length of the hair is 8 cm, and in other zones everything can be removed “to zero”.

In summer, such sports hairstyles for guys do not allow the head to overheat and at the same time do not create additional heat. And in the winter he does not hesitate under the cap. Even in the offseason, once in the rain, you can get a new style of this hairstyle - if you apply gel on slightly damp hair and ruffle your hair.

Technology haircut do it yourself

Halfbox is quite simple to create. Adhering to a few step-by-step recommendations, you can mow your hair yourself.

To do it you need: a hair machine, straight scissors and four nozzles from 1 to 4 cm. It is done on dry hair. So, the course of trimming:

First you need to use the longest nozzle. With it, you need to cut hair starting from the temples and moving higher in the level of growth of the strands,
then replace the nozzle with a shorter one. She completely shaves the hair below the temples,
strands on the parietal and lateral areas are trimmed with scissors,
the line from long hair to short is performed by shading to achieve a smooth visual transition,
bangs can be cut to the middle or left completely. Everyone decides for himself.

These actions will not create difficulties for those who have repeatedly experimented on themselves or at least once held a clipper in their hands. Hairstyle short tennis, like a halfbox is a type of sports haircuts. You can find out more about hairstyle short tennis here http://ilhair.ru/muzhskie/mpricheski/universalnaya-tennis.html

The level of skill of the hairdresser does not really affect the final result. For such a hairstyle is particularly important skillful possession of a machine for cutting.

Cutting off the temporal - lateral sections of the head is carried out under null.

And the parietal zone is removed with scissors. To do the semi-boxing hairstyle, the master will need: a cutting machine, a set of nozzles for it, scissors, their thinning counterpart, possibly a razor. Completing of the work:

haircut starts from the center of the occipital region. There is a gradual vystriganie stripes on the one hand, and then on the other. It all comes down “under zero” with a typewriter or a razor. If the latter is used, the strands must be moistened. When using the machine, you can perform a hairstyle on dry hair,
the upper part of the haircut runs along the line along the occiput and the ears. At uneven transition work is corrected by scissors.
shorn strands at the temples. The length of their hair depends on the already clipped occipital zone,

Haircut box is an excellent choice for those who want to look stylish in any situation, while not spending time on styling and special care. It is only necessary not to forget to make the haircut adjustment on time, and one can have a well-groomed look without much effort.

Men's haircuts with a pattern are always in trend. We recommend you read more about them.

Editorial Board

If you want to improve the condition of your hair, special attention should be paid to shampoos that you use.

A frightening figure - in 97% of shampoos of famous brands are substances that poison our body. The main components, due to which all the troubles on the labels are designated as sodium lauryl sulfate, sodium laureth sulfate, coco sulfate. These chemicals destroy the structure of the hair, the hair becomes brittle, lose elasticity and strength, the color fades. But the worst thing is that this stuff gets into the liver, heart, lungs, accumulates in the organs and can cause cancer.

We advise you to abandon the use of funds in which these substances are located. Recently, experts of our editorial staff conducted an analysis of sulfate-free shampoos, where the first place was taken by funds from the company Mulsan Cosmetic. The only manufacturer of all-natural cosmetics. All products are manufactured under strict quality control and certification systems.

We recommend to visit the official online store mulsan.ru. If you doubt the naturalness of your cosmetics, check the expiration date, it should not exceed one year of storage.

Who is suitable?

This option is suitable absolutely everyone, regardless of the shape of the face, head size, hair color and age. Haircut box will decorate every man and emphasize his courageous features. In the photo below you can see stylish modern images.
You should not choose such an image for men with curly hair. This hairstyle will look sloppy.

Hair boxing is not suitable for people with visible defects of the scalp. Short haircut will not hide the flawsand in some cases may emphasize them. People with skin defects and scars on their heads should be drawn to such elongated options as halfboxing, Canadian, etc.
Such an image is an ideal choice for men with unruly and oily hair. Men's haircut box does not require special care and daily washing.
This hairstyle goes well with any hair color. Boxing looks especially harmonious on fair-haired men, as in this case, the scalp does not shine through short strands.

In the photo below you can see the "star" images that have become the standard of style and masculinity.

Execution technology

For work you will need the following tools: a special hairdresser's machine with a nozzle for short hair (1 cm), ordinary hairdresser's scissors, thinning scissors (preferably) and a comb.

Determine the boundaries of the transition from short to long strands. Remember that the border should be located just above the head. In addition, during the haircut should take into account the features of the man's appearance. So, for men with sunken temples, the border of the transition should be slightly lower than the temples, and for people with bulging temples this line will be located slightly above the temporal zone.
Using a hairdresser's machine with a nozzle of 1 cm, cut the strands in the occipital and temporal areas (up to the border).
At the third stage, you can proceed to the design of the parietal zone. In this part of the head, the hair is trimmed with scissors. To do this, divide the parietal zone into strands and cut each to the desired length (a detailed photo-instruction is presented below).
Next, make straightening strands using special scissors (you can use a razor instead of scissors). Filirovka help hide the sharp transition from one length to another.
Handle the front and side strands with thinning scissors.
At the last stage it is necessary to issue a bang. It can be removed completely or cut to the middle of the forehead.

Haircut at home

If you are confident in yourself as in a hairdresser and you do not have enough time to visit the salon, you can perform half boxing yourself. However, first get acquainted with the technology of video.

For a haircut at home you will need:

machine (usually these devices have a few nozzles)
scissors for filing (on one of the blades of such scissors there are frequent teeth),
hairbrush.

The technology for doing this men's haircut is quite simple, so a beginner in hairdressing can handle a halfbox too.

Wash your hair, blow-dry your hair and comb it in the direction of growth.
Install a minimal attachment on the clipper and process the back of the head, mentally limiting it with an arched line running between the upper tips of the ears. The arc represented must have an omission in the center. Haircut is best done with strips, first on one side, then on the other.
Carefully trim the neck, behind the ears and on the temples.
Process the strip of hair with a different attachment above the above-mentioned arc (so that the transition from short to long hair is smooth). This strip should have a width of 2 to 3 cm. At this stage you will need scissors for thinning.
Hair in the region of the crown must be cut by hand, pulling off strands. Their length should be 5-7 cm.
The final stage of this men's haircut is the execution of thinning.

Types of semiboxing

The hairstyle of semi-boxes has several types. You can diversify your hair due to some innovations in the traditional model.

When performing male haircuts, you can make a half-box bang.
Varies the width of the strip, which serves as the border zone between short and long hair.In addition, it is possible to lower and raise the transition line itself.
Modern male poluboks allows the execution of the figure on the side areas of the head (where the hair is the shortest). This type of haircut is especially popular with young men in 2016.

Care instructions

Like any haircut, male halfboxing requires care for clean hair and regular trimming tips. Without these standard procedures, any man with any haircut looks untidy. However, this men's haircut does not need tedious daily care and long styling.

If you want to make a fresh accent in your image, you can use styling foam and slightly tousle the hair on the top of the head or lift the bangs. So you try on the role of careless hanging.

Distinctive features

The haircut of the semi-box is a classic and suits almost all the representatives of the stronger sex. It is distinguished from others by a shaven occipital-temporal region and a clear line of edging. It is also important that the transition from short to long strands be smooth.

At the request of the client master can leave the bangs. An extended version will suit confident young people who like to create different styling. You can experiment with the length of the hair on the back of the head - it can be both short and longer. Or to make a drawing - especially often this option is chosen for children's haircuts or young people who want to add originality to their image.

Benefits

Male haircut half box has a number of advantages that make it so popular:

This hairstyle goes well with any style of clothing. The image is fashionable and courageous.
This haircut makes a man younger.
Easy to create styling and hair care.
Makes more obedient curly hair.
It focuses on the facial features, making them even more expressive.

The haircut of the semi-box is also universal: it looks good on any hair (both straight and curly) and is suitable for owners of faces of any shape.

To suit

Despite the versatility of the haircut, you still need to take into account some features of the appearance, to maximize the dignity of the man. Especially good box looks on owners oval or round face.

The easiest way to do it on straight and thick hair. But an experienced master can make this stylish haircut and curly hair. Due to the fact that the hair on the temples of the minimum length, the face becomes more open. Therefore, a semi-box is especially suitable for men with a beautiful line of cheekbones and expressive features.

What you need

In order to create a haircut of semi-boxes, you will need:

Straight scissors.
Scissors for milling.
Hairbrush.
The machine with various nozzles.

An experienced master can make a haircut of a semi-box with a machine and a comb. However, in order to get a more accurate hairstyle, you should use the listed tools.

Hair styling technology

It can be done even at home, because to create this hair do not need any special hairdressing skills. Below is a step-by-step execution of a haircut of semi-boxes

An important nuance - this hairstyle provides for a double edging. Therefore, the work must begin with the design of the temples and the neck, and only then proceed to work with the lower boundary of the hair. Haircut should be done on washed hair and combed in the direction of growth.

Direct scissors to note where the transition will take place between long and short hair. Then from the central part of the nape the hair is cut off alternately from both sides. Machine or scissors (here you need to choose the more convenient to work) strands shortened to the desired length. When working with very thick hair is better to use the technique of "comb".
Working with the temporal region, you need to take into account its features. If it is sunken, then the edge of the edging should be done a little below the natural line. If the temporal region is convex, then it should be slightly raised. The upper temporal part must be trimmed at an angle of 45 °.
The final touch of working with the temples is the correction of the strands to the desired short length.
The edging of the temples is done with the help of a typewriter.
To make a smooth transition, you will need thinning scissors. It is made in the direction from the tips to the roots, about 3 cm above the control line.

Properly done haircut box should have an oval shape. Excess hairs can be removed with the help of a typewriter. Making bangs do at the end of the process of cutting.

The difference between a semi-box and a box

These hairstyles are very similar and are among the most popular among short haircuts. But despite the similarities, there are differences between them. The difference in haircuts boxing and halfboxing is that in the first embodiment, the hair on the parietal part has a shorter length. In the second variant, the line of edging is made at the level of the neck or slightly lower. Also in a haircut boxing bangs either do not do at all, or do not do too voluminous.

Styling options

It is very easy to make haircuts for boxings. But she will look stylish and make the image of a man more spectacular.

If you want to create an image of a daring and confident man, then you should make an artistic mess on the top of your head, raise your bangs and fix everything with gel.
For business meetings, styling is suitable with hair brushed to the side or back. Just don’t apply too much styling to maintain its neat and elegant look.
If length permits, then you can collect hair into a ponytail. This option is suitable for confident people who are not afraid to experiment with hair.

Also during laying you need to pay attention and bangs. You can remove it to the side or back, slightly raise to add a bit of retro-chic to the image. But men's hair cut, half-box looks good and without any additional styling.

What is a haircut box

Haircut keeps its pedigree from boxing hairstyles, which is easy to understand by name. If the latter implies a minimum length of hair and the maximum open neck, haircut of this format is less severe: the hair at the top is left longer, and the line of the border (contour of the hairstyle) on the back of the head falls below. Whiskey at the same time in both variants remain short. Initially, this haircut was invented for the military and sportsmen: shaved nape and temples cause the least discomfort during significant physical exertion.

Strands on the top longer than 5–8 centimeters. Towards the back of the head and temples, the hair is shortened, almost to zero. The line of the head for this hairstyle is not precisely defined and is selected by the client. The main condition is that the transition from short hair at the back of the head to long hair at the top of the head and crown is done carefully. Often there is a bang, which combed back and thereby lengthens the shape of the face.

In the haircut box is important a smooth transition from the shovels of hair at the top of the shaved nape

Types of hair

If the hairstyle is similar to its older "relative" - boxing, but there is still the possibility of styling, then this is a shortened half-box.

The extended version of the haircut is obtained thanks to bangs. Ideally, a strand from the forehead should reach the crown. The variant with a bang is often called a model or club halfbox. In fact, this is an unusual styling bangs based on the classic look.

Examples of haircuts model box with styling

Model can be considered a variety with patterns on the temples.

Patterns on the temples in combination with styling - a way to diversify the hair

4.3 Technique performing haircuts

Haircut "Poluboks"

Fig. 4.8. The scheme haircut "Poluboks"

Haircut (Fig. 4.8) begin to perform with hair removal on no electric machine. The line of exit of the machine from the hair passes through the occipital bump and 1 cm above the ear. The hair of the parietal zone is divided into horizontal partings, cut from the outside of the fingers, brushing off each strand of hair perpendicular to the head. The length of the hair after the haircut is 3. 5 cm. After the haircut on the parietal zone, the hair is combed to the temple and the back of the head, then shading is performed with scissors and a comb, making a smooth transition from short to long hair. Edging produced by electric machine.

Haircut "Boxing"

Fig. 4.9. Boxing haircut

Haircut (Fig. 4.9) start with hair removal on no electric machine. The line of exit of the machine from the hair is higher than the hair cut "Poluboks" from the temporal protrusion and 1. 2 cm below the crown. The hair of the parietal zone is divided by horizontal partitions and cut from the outside of the fingers, brushing off each strand of hair perpendicular to the head. The length of the hair after cutting is 3. 5 cm.

After cutting the parietal zone, the hair of this area is combed to the temple and the back of the head, then the hair is shaded using scissors and a hairbrush, making a smooth transition from short to long hair.

Edging produced by electric machine.

Haircut "Tennis"

Haircut begins with the temple. Using the machine, the shading is carried out 1. 1.5 cm above the upper edge of the ear. The same technique consistently shear the hair behind the auricle and in the lower occipital zone. Edging at the temples and neck perform the machine. The hair is combed in the direction of its natural growth and is cut with thinning scissors, creating a smooth transition from short to long hair. Having brushed off the hair from the face, start cutting the parietal area. Hair is cut by the method on the fingers, smoothly connecting with the length of the hair on the temple and the back of the head. The cut of the hair on the parietal zone can be made as a straight cut, and dentate. In the area of the crown, to create volume from the inside of the fingers, you can make out the filiration with straight scissors. Hair of a parietal zone is combed off on a face, a bang is cut in a straight line.

Haircuts "Hedgehog", "Bobrik", "Kare"

The styles of these haircuts (Fig. 4.10) are very similar, differ only in the shape of individual sections of hair, short hair length. Haircut "Hedgehog" gives the hair the shape of a ball slightly extended upwards (see Fig. 4.10, a). Haircut "Bobrik" on the parietal zone of the head has the shape of a flat area (Fig. 4.10, b), the remaining sections of the hairstyle are of the same shape as in the haircut "Hedgehog". Haircut "Kare" differs from the previous two in that it has the shape of a flat platform not only in the parietal zone, but also in the temporal areas of the head (Fig. 4.10, c).

Fig. 4.10. Haircuts "Hedgehog" (a), "Bobrik" (6), "Kare" (a)

The hair of the parietal region of the head is brushed perpendicularly to the skin. The peculiarity of this haircut is that the better the hair is pulled up, the higher the quality of the haircut. It is easiest to fulfill this condition on straight and hard hair, the length of hair on the parietal zone should not exceed 5 cm. If the hair of the parietal area is longer than 6 cm, it should be shortened with the method on the fingers. After shortening the hair is moistened with water, then gel.

Hair put in a vertical position, holding the comb in his left hand, and the brush - in the right. Comb set at the edge of hair growth on the forehead and comb her hair from forehead to the top. The comb is advanced in the direction of the crown by 5. 6 cm, the brush is inserted into the hair. The brush is moved in the same direction as the comb. When the brush begins to move to the back of the head, the comb is removed from the hair and returned to its original position, retreating from the edge of hair growth on the forehead 2. 3 cm. Thus, all the hair of the parietal area of the head is treated. At the border between the temporal and parietal zones, as well as the occipital and parietal zones, hair is combed by moving the comb and brush up to the parietal zone. After combing, the hair should be allowed to dry, then proceed to further processing.

The pad is performed by holding a comb in the left hand, and scissors on the right. Comb and scissors must be installed in a horizontal position. From the edge of hair growth on the forehead, the comb is inserted into the hair and slowly begins to move to the back of the head, while the scissors are held above the comb parallel to it. As the hair moves, it cuts off the hair it captures, but on condition that the hair is in an upright position.

Work is done smoothly, scissors and a comb at the same time moving to the back of the head. During the haircut on the parietal zone, it is necessary to look more often in the mirror, where the result of the performed hairstyle is more clearly visible.

The hairs of the temporal and occipital zones are nullified by a typewriter or a shading method, giving the cut a vertical or oval shape.

"Bob-caret" in the male haircut

Fig. 4.11. Haircut "Bob-Caret"

A control strand of hair is separated with an arched parting (Fig. 4.11). The width of the control strand at the temple and above the ear is 3 cm, at the nape the width of the control strand is 6. 7 cm. The hair of the control strand is faded and the edging is performed. Parallel to the arc-shaped parting, a control strand with a thickness of 1 cm is separated, combed down along the tangent to the head, and cut from the inside of the fingers, giving the cut-off line the shape of the arc-shaped parting. The cut line runs along the section of hair removed to nothing, covering it by 1. 1.5 cm. Parallel to the control strand, the next strand of hair is separated, combed down along the tangent to the head and sheared from the inside of the fingers, focusing on the length of the previously trimmed hair. And so strand by strand on a tangent to the head cut all the hair to the center parting.

Hair trimming on bangs can be performed along the length of the hair, which turned out during the haircut, or shorten the hair, giving the edging an oval shape.

Haircut "Garson"

The hair is divided in part (Fig. 4.12, a). The parting goes from ear to ear through the crown of the head. M. Stitch begins from the occipital zone. On the crown, along the entire length of the parting, the control strand is separated, combed perpendicular to the head, and cut from the outside of the fingers (Fig. 4.12, b). In the center of the occipital zone carry out a vertical parting, dividing the occipital zone in half. Vertical parting in the center of the head separates the control strand, combed it perpendicular to the head and cut from the outside of the fingers, focusing on the length of the hair of the control strand of the crown. The length of the hair of the vertical strand to the neck is reduced to 1. 2 cm (Fig. 4.12, c).

Fig. 4.12. Haircut "Garson":
a - the selection of zones through the crown, 6 - haircut control hair strand on the parting, in - hair cutting of the occipital zone, g - hair cutting of the temporal areas, d - hair cutting of the parietal area

Parallel to the previous strand, the next strand is separated by a vertical parting, combed perpendicularly to the head and sheared, focusing on the length of the hair of the previously trimmed strand. So strand by strand cut the entire occipital zone from the center to the right, then to the left.

Temporal haircut. Vertical parting parallel to the edge of hair growth at the temple, select the control strand, comb it perpendicular to the head and cut from the outside of the fingers, reducing the length to the ear. The length of the hair in the upper part of the strand is 4. 5 cm, and downwards decreases to 1. 2 cm. Thus, strand by strand cut the entire temporal zone (Fig. 4.12, d). Attach to the hair of the temporal zone the hair of the occipital zone, seize a strand of hair behind the ears in one motion and cut from the outside of the fingers, trimming their length.

The hair of the parietal zone is clipped from the crown to the face on the fingers. Each strand is cut into three grips, first in the middle, then from the sides, connecting the hair of the parietal zone with the temporal zones (Fig. 4.12, e).

Perform edging straight scissors, starting with bangs. The fringing line of the bang is made in a straight line slightly below the eyebrow line. Whiskey made in a straight or oblique line with an open ear. The hair of the occipital zone is edged depending on the individual characteristics of hair growth.

Haircut "Ring"

The hairs on the crown zone are parted and fixed with a clip.

The haircut starts from the lower occipital zone, where the shading is performed with the thinning shears. Hair Length 1.2 cm is determined according to individual characteristics. Then shading performed on the temporal zones. Haircut of the parietal zone begin with clearance control strands. Vertical partitions in the center of the neck distinguish the control strand of hair. It is brushed perpendicularly to the head and cut with straight scissors from the outside of the fingers. Length strands 3. 5 cm, depending on their individual characteristics. The hair of the parietal zone is separated by horizontal partings, the strands of hair are combed perpendicularly to the head and cut from the outside of the fingers with straight scissors, focusing on the length of the hair of the previously trimmed control strand.

The hairs in the area of the top are brushed perpendicularly to the head and, with a common grip, are cut with straight scissors from the outside of the fingers. The length of the hair is determined in 10. 12 cm, taking into account their individual characteristics. To ensure a smooth transition from long strands at the crown to short hair in the occipital, temporal-lateral and frontal zones, the hair is combed from the crown in different directions and separated by radial partings. Each strand of hair is brushed perpendicularly to the head and clipped from the outside of the fingers, smoothly connecting the long hair of the crown of the head with shorter hair in other parts of the head. Edging is performed at the end of the haircut, making it straight scissors or a typewriter.

Features of the haircut "Kare"

Hair divided by parting. The first parting runs from the frontal protrusion to the middle of the hairline on the neck. The second parting passes from ear to ear through the top point of the head (Fig. 4.13, a). Start cutting from the occipital zone. A horizontal parting parallel to the edge of the growth of hair on the head, select the control strand of hair. Hair control strands combed down on a tangent to the head and cut from the inside of the fingers in a straight line. So strand by strand cut all the hairs of the occipital zone, brushing them tangentially to the head (Fig. 4.13, b).

Fig. 4.13. Bob haircut":
a - division of hair into zones, b - haircut of the occipital zone, c - haircut of the temporal and parietal zones of the head

Haircut temporal and parietal zones. Horizontal parting, parallel to the edge of hair growth at the temple, isolate the control strand of hair, comb it down tangentially to the head and cut it from the inside of the fingers, continuing the straight line of the occipital zone. So strand by strand cut all the hair of the temporal and parietal zones, each strand of hair is brushed along the tangent to the head (Fig. 4.13, c).

On the basis of the basic “Kare” hairstyle, you can make various silhouettes of haircuts. Consider several options.

Option 1 (Fig. 4.14). Perform "Kare" by the above method, determining the total length of the hair.

Fig. 4.14. Option 1 run haircut "Kare"

Haircut parietal zone. From the edge of hair growth on the forehead, a control hair strand is separated with a horizontal parting, combed perpendicular to the head, and cut from the outside of the fingers in a straight line. So strand by strand is sheared to the middle of the parietal zone. A vertical parting coming out of the middle of the frontal incision, secrete a strand of hair. The length of the selected strands is equal to the area of hair removed on the fingers. The hair of the selected strands tightens to the trimmed hair and is cut from the outside of the fingers, focusing on the length of the hair of the parietal zone. Vertical partings extend to the crown and wrap it in a half ring. The hair of the head zone is brushed perpendicularly to the head, twisted into a bundle and cut with a straight or oblique cut, focusing on the length of the hair of the parietal zone.

Option 2 (Fig. 4.15). Hair trimmed by the above method. Temporal and occipital zones are separated by vertical partings. Each strand is brushed off from the surface of the head at an angle of 90 °, i.e. perpendicular to the head. The hair of the selected strands is cut from the outside of the fingers, connecting the length of the hair of the parietal zone with the edging obtained by cutting "Kare".

Fig. 4.15. Option 2 run haircut "Kare"

Option 3 (Fig. 4.16). Haircut is performed on the hair length to the shoulders or below the shoulders. Performing the haircut "Kare", create the length of the edging of the future haircut. The horizontal parting, passing from the ear to the ear through the upper point of the head, separates the occipital zone from the parietal and temporal. In the center of the parietal zone, a control strand of hair is separated by vertical partitions, combed perpendicular to the head and cut from the outside of the fingers, giving the shear a straight or oblique line (Fig. 4.16, a). Then all the hair alternately combed to the control strand of hair and cut at its level (Fig. 4.16, b).

Fig. 4.16. Option 3 run haircut "Kare":
a - haircut of the central strand on the parietal zone, b - haircut of the temporal and parietal zones, c - haircut of the hair strand on a vertical parting, d - haircut of the occipital zone

If the hair is lifted perpendicularly to the head along the vertical parting on the trimmed side, then a straight cut line will be obtained. This line will be the control when cutting the hair of the occipital zone (Fig. 4.16, b). The hair of the occipital zone is divided in half by a vertical parting, which makes it convenient to divide the hair of the nape into horizontal partings. So strand by strand cut the hair in the upper part of the occiput, pulling it to the control strand passing through the top point of the head, cutting off the outside of the fingers.

Haircut lower occipital zone as follows. The hair is separated with vertical partitions; each strand is brushed perpendicularly to the head and cut from the outside of the fingers, smoothly connecting the length of the hair of the upper occipital zone with the hair of the edging obtained by cutting “Kare” (Fig. 4.16, d).

Haircut "Cesson"

Hair divided by parting. The first parting runs from the frontal protrusion to the middle of the hairline on the neck. The second parting passes from ear to ear through the top of the head. The third parting runs along the entire edge of hair growth on the head, highlighting the control strand (Fig. 4.17, a). Haircut control strands begin with the occipital zone. The strand is brushed down tangentially to the head and cut from the inside of the fingers, giving an oval shape to the shear (Fig. 4.17, b).

Fig. 4.17. Haircut "Cesson":
a - division of hair into zones, 6 - cutting the control strand of hair at the back of the head, c-cutting the control strand on the parietal area, d - cutting the control strand of hair at the temple and performing a graduated cutting across the entire scalp

Then go to the hairstyle of the parietal zone. The hair is brushed on the face and cut from the inside of the fingers, giving the shear shape of an arcuate (Fig. 4.17, c). The temple's hair is brushed down and clipped from the inside of the fingers, smoothly connecting the line of the bang to the back of the head.

Parallel to the control strand of hair, the next strand is separated, combed along the tangent to the head and sheared from the inside of the fingers, focusing on the length of the hair of the reference strand. By this method, one or two strands of hair are cut at a tangent to the head.

All subsequent ones are brushed off from the surface of the head at an angle of 45 °, while observing the exact cutting method - strand by strand. Trimming the hair with this method performs hair graduation (Fig. 4.17, d).

Haircut cascade"

Hair divided by parting. The first parting runs from the frontal protrusion to the middle of the hairline on the neck. The second parting passes from ear to ear through the top of the head.

In the place of their intersection, a square is distinguished, each side of which is 3. 4 cm; the selected strand of hair is a control one.

Fig. 4.18. Haircut cascade":
a - selection of the control strand of hair, b - haircut strand by strand

The control strand is brushed perpendicularly to the head and cut from the outside of the fingers in a straight line. The length of the control strand is arbitrary (Fig. 4.18, a).

To begin to cut from the left occipital zone. With a parting parallel to the control strand, a strand of hair is separated, combed up along the tangent to the head and sheared from the outside of the fingers, focusing on the length of the control strand. So strand by strand cut all the hair of this zone (Fig. 4.18, b). Selected areas of the head are cut alternately in the same pattern as the right occipital zone.

"Layered" haircut

Circular parting separates the control strand on the crown, combed perpendicular to the head and cut the outer side of the fingers, giving it a certain length. The length of the control strand is 7. 9 cm (Fig. 4.19, a).

Fig. 4.19. "Layered" haircut:
a - selection of the control strand, 6 - the line of cutting hair from top to bottom

In the center of the occipital zone, a control strand of hair is separated by a radial parting, combed perpendicularly to the head, and cut from the outside of the fingers. The line of cut hair begins from the control strand at the top and goes down to the elongation (Fig. 4.19, b).

So strand by strand cut all the hair around the circumference. Then perform the edging and styling.

Will it work or not?

The hairstyle is universal - visually it creates a strong vertical axis, which emphasizes the oval or rectangular face well. If the shape of the face is round or square, then such styling will visually lengthen the forehead line and create a more harmonious look.

An example of a successful image: an elongated version of a halfbox, with temples released and volumetric bangs combed back, makes Leonardo DiCaprio's face less round

Doubts can arise only if the face is already too long - in this case it is better not to lengthen it even more, but to give the head an additional volume on the sides.

Model box even more visually pulls the elongated face

How to make a haircut at home

Before proceeding directly to the description of the process, we recall that no one will cut your hair better than the master. After all, the professional already has a wealth of experience, and when mowing the house you can not take into account all the nuances. However, when there is no desire to visit the salon, it is quite possible to do the hair of the half-boxes at home, if you ask a neat and well-managed person with scissors. If you have a trimmer (clipper and shaving machine with nozzles of different sizes), then you can risk a haircut without any help, but it will be very inconvenient, especially when you go to the back of the head - you have to arm yourself with an additional mirror. In addition to the mirror, you will need:

clipper. The size of the nozzle depends on the desired length of hair at the temples and the back of the head - usually 3-4 mm,
scissors (besides the usual ones, if necessary, you can take thinning shears for thinning hair),
hairbrush,
hair clip - if at the top the hair is longer than average,
hair dryer - for styling.

It is better not to save on tools for creating hairstyles. After all, their quality will certainly affect your hair.

How to cut: stages of implementation

To wash the head and dry a little - wet hair is easier and more convenient to cut.
In the question of what exactly to begin the work, the opinions of the masters diverge. Some immediately begin with the work of a clipper and shaving the temples and the back of the head, others first remove the length at the crown and parietal part with scissors and only then go to the temples. Depends on the length of bangs and hair on the crown. If it suits you - you can immediately start with the temples. Take the nozzle size of 3-4 mm and move back from the temples. First process one temple, then the second, and only at the end go to the back of the head. At this stage, you should already understand whether you can cope with the back of your head on your own or it is better to call for help from a relative.

Master shaves whiskey using a clipper

For convenience, you can stab your bangs with clips.

Bangs for convenience can be stabbed with clips, especially if you cut yourself

Haircut control strands, relative to which is determined by the length of the remaining hair

Making the transition with a comb and clippers

Hairstyle is nearing completion - we shave the machine at the bottom of the head “under zero”

Basic styling for an elongated halfbox - volumetric bangs combed back

We select the styling

Even if there is no nail polish or hair gel on hand, this does not mean that you need to give up styling. After all, the easiest way to pack your hair is to use a hairdryer after washing your head and simply fix the strands with a stream of air in the direction you need. And if you use cosmetics to fix the shape of the hair, the styling will be more durable. Do not be afraid to get lost in the variety of styling products. To make the right choice you need to know what they are and how they differ:

Gel - a common means for male styling, characterized by reliable fixation. Minus - it does not always look natural on the hair, but on thin and fluffy it generally creates the effect of an unwashed head,
mousse is a more gentle means of medium fixation, suitable for simple styling,
Wax - a very strong fixation, but there is a risk of “overloading” the hairstyle. Apply only on dry hair,
varnish - allows you to create easy styling without the use of other means or used for additional fixation.

The possibility of creative styling in the semi-box is provided by the presence of bangs. Although the shortened type can also be given an interesting shape - for example, put the hair "upside down" with the help of styling gel - for this it is enough to take a little gel on your fingers and walk it through the hair.

Upside down with wet hair effect

If there is a bang, then the styling options become almost endless. You can remove the hair from the forehead using gel or mousse, and fix the result with a hair dryer.

The laid bang opens the face and makes the image brighter

Long bangs and shaved temples also allow you to combine in one image retro and newfangled trends. Making a curly curl in the style of the 50s is very easy: to do this, apply gel or mousse on your hair and wrap your bangs around your finger. If the hair is very naughty - fix the clips and spray varnish. When the hair will take shape, remove the clips.

A 50s-styled bang adds retro chic to the image

Even if you just comb the hair on one side, leaving the volume (mousse again to help), the hairstyle will look just as elegant.

The volume from the roots, bangs on the side and shaved whiskey - elements of an elegant image

Hair care

Whatever hairstyle you choose for yourself - its beauty primarily depends on the condition of your hair. Hair, in turn, reflects the overall health of the body, so it is useful to recall that external beauty and well-being are inseparable from each other. Therefore, the recommendations for the care of hair cut half a box does not differ from the general recommendations for hair care:

choose high-quality products for washing your hair and styling, suitable for your hair type. Although men often prefer to wash their hair with shower gel, do not be lazy and get a shampoo - hair will tell you "thank you"
wash your hair as often as necessary
always wash off the styling products before bedtime,
update your haircut once a month and a half,
do not abuse the drying with hot air, so as not to overdry the scalp,
Avoid stress and monitor overall health.

Hairstyle box will allow any man to look courageously and stylishly. For its creation, you can contact the hair salon, or, adopting the recommendations of experts from the beauty industry, get a haircut at home. The versatility of styling and ease of care - powerful arguments in choosing haircuts.

History of origin

There is no exact data on the origin of this haircut. Some say that it was popular among athletes, others claim that it was invented by American soldiers for greater convenience. It doesn’t matter how halfbox came to us. It is known that the peak of its popularity falls on the middle of the 90s.

Nowadays, hair cut box is considered one of the most popular. She is chosen by both a man and a boy, which testifies to the universality of her hairstyle.Technology implementation is quite simple, allows you to learn at home to create a masterpiece on the male head.

Step by Step Execution Instructions

View video tutorial on the World Wide Web will give a general idea of the implementation of hair. For those who want to learn step by step, there is a scheme and features of technology:

At the first stage, the double-edging is done. Strands in the temples and the back of the head are sheared first. Then cut off the bottom edge of growth. At the same time the master adjusts the length of the hair. It depends, of course, on the desire of the client.
Next, milled curls in the back of the head. Aligned line edging.
In the temporal zone, the hair is clipped at a 45 degree angle.
The final step will be bangs. It all depends on the desire of men: long, short or completely without it. Polubox under any length will look harmonious.

As expected, there is nothing complicated in the implementation of hair. This haircut is included in the lesson "hairstyles for beginners", so the master novice will cope with it without difficulty.

Principles of hair care

Half box does not require special skills for the care and styling, which will undoubtedly be appreciated by a strong half of humanity. Regular shampoo and styling products will be sufficient. It is important to dry the hair in the direction of hair growth.

Lovers of extraordinary hairstyles can use gels, mousses, varnishes and foams to fix the strands in the form of a iroquois. Among young people, laying bangs in various ways is especially popular.

Haircut machine at home

It is no secret that men do not overly favor frequent visits to the barbershop. Therefore, recommendations for the performance of a haircut machine at home is very useful for women:

The working surface of the machine must be lubricated with a special oil so that it cuts the hair and does not tear it out.
It is necessary to choose the nozzle length depending on the desire of the man. If he has long strands, will have to use scissors. Classic boxing will be a shorter option, halfboxing is a longer one.
At the first stage, the hair on the back of the head is clipped. The direction of the machine should be chosen from the bottom up to make the tracks. After that proceed to the top. It would be more correct to cut it against hair growth.
In the course of cutting the nozzles can be changed. For temples, it is better to wear a shorter nozzle and handle it very carefully. If desired, the temporal and cervical regions are sheared without attachments. It requires maximum caution, because the machine without the nozzle is very sharp.
The most difficult stage for a novice master will be to cut his bangs. If you want to leave the length, use scissors. To trim the bangs with a nozzle, choose the longest. Pre-costs to protect your eyebrows with a piece of bandage and patch.
In conclusion, the tempering line tempering and neck area is inserted with a nozzle of 3 mm.

There are several such techniques and almost every woman can master them. In order not to dwell on the time of cutting, you must choose a machine with a capacious battery. To more clearly see the process, it is necessary to type in the search box the query "how to cut a man for beginners with a machine". A lot of video tutorials will come to your rescue.

Female variant of the semi-box

In line with the trends of the beauty industry, a whole range of men's hairstyles has migrated to the ladies' arsenal. The female sex regularly surprises the world with bold and bright decisions. One of them is women's hair cut box.

The simplicity of care and styling makes this model of hair very popular among business women.. Features are similar to the male version, and the technique of execution is no different. The only difference is that the variation of the length of the curls at the crown is more diverse.

Female box help look younger than middle-aged ladies. Add boldness and charm to young girls. Even the owner of curly and curly strands can afford this haircut. That's just with the styling will need to tinker.

It does not matter which variant of the semi-box will be chosen by ladies and gentlemen. He will certainly highlight the facial features, hide the flaws in the shape of the head, give brutality to the image of a man. Ladies will add charm, charm and emphasize their individuality.

Send